1-3/8" Feed Opening Bar Hole Plug, Black Plastic

This plastic plug is compatible with our horse stall feed openings. These plugs fit into 1-3/8" bar holes. Feed your horses from outside of your stalls safely, without ever having to step inside of the stall!

Installation: Decide where the feed opening is going to be located. Cut two stall grill bars to the desired length (bars cut to 22” will give you approximately a 12” opening). Slide the feed opening plate over the two outer bars of the opening. Let the feed opening plate rest on the bottom grill channel. Insert the two cut stall grill bars in the top grill channel and slide the feed opening plate up - until it is tight with the two cut bars. Use the four supplied hex head self-drillers to hold the feed opening plate in place through holes in the feed opening plate.