SKU: 5ETEN (W,B,BR)
Our one person tightening system coupled with the end plate makes the fence easier to tighten. You never have to tighten or loosen High Impact Fence from winter to summer.

SKU: 5EPLATE
With the 5 Inch High Impact Performance Plus and Performance series flex fence, the 5 Inch End Plate is attached to the end posts, and is an essential part of the one-person install.

SKU: 5NB (W,B,BR)-.5
The 5 Inch Line Post Bracket allows the High Impact Performance Fence to move freely when the fence is impacted by a horse. Hot-dipped galvanized and then powder coated on heavy gauge steel make these brackets last.

SKU: 4ETEN (W,B,BR)
Our one person 4 inch Rail tightening system coupled with the end plate makes the fence easier to tighten. You never have to tighten or loosen High Impact Fence from winter to summer. Just enjoy it, we know your horses will!

SKU: 4EPLATE
With the 4 Inch High Impact Performance Plus and Performance series flex fence, the 4 Inch End Plate is attached to the end posts, and is an essential part of the one-person install.

SKU: 4NB (W,B,BR)-.5
The 4 Inch Line Post Bracket allows the High Impact Performance Flex Fence to move freely when the fence is impacted by a horse, and is a key component of your fence project.

SKU: WL
Used with the Raceline Coated Wire fence to splice two ends of high tensile wire and coated high tensile wire fences.

SKU: TENSIONER
Use with tensioner handle to apply tension to High Impact Flex Fence. Rounded edges are frendlier for horses and livestock. 5" ring shank nail gives more holding power.

SKU: WV125
One way, non-release, one time use smooth wire tightener. Excellent for short runs that are smaller than 100 feet. These 12-gauge wire vises are used with 5.25 and 4.25 flex rail fencing and coated wire. Teeth inside prevent the wire from backing out.

SKU: CS125
Used to splice together sections of 12.5 gauge Flex Fence and coated wire. Requires crimping tool, sold separately.

SKU: BS2
Attaches coated wire to Fence posts. Used to terminate Flex, and sold by the pound. 44 barbed staples per pound. Installation: Leave 1/4 inch space for rail movement.

SKU: BS2W
Made from 1/4 inch galvanized steel so it will not rust or corrode. Our extra wide 2 inch barb staple comes with very sharp ends for easy penetrating into wooden posts and 4 metal barbs, 2 on each side of the staple. Accommodates insulated tubing.

SKU: 35N
Fastens tensioners to post. Sold by the pound. 37 rink shank nails per pound. Tremendous holding power.
