Gates and Latches
RAMM gates are completely dipped after fabrication to cover every bit of the gate inside and out with a thick coat of corrosion-resistant zinc. Our hot-dipped tube gates are the ultimate in tough, durable and long lasting gates. Zinc physically bonds to the steel for unequalled protection against wear and weathering.
Our gates are 50” high and the tubing is 2” 16-gauge Hot-Dipped Galvanzied.
RAMM Tip: Consider using stone screenings where your most used gates are located. In inclement weather, your ground will be firm, and not muddy, for turnout.
-
1-Way Latch
SKU: 02177-1
This is a 1-Way Gate latch, that gives you one-handed operation. It prevents gates from sagging or swinging. Can be opened from horseback. Fits gates with 1 5/8 inch - 2 inch o.d. round tube.
Product Details »
Average Rating: 0/5 -
2-Way Locking Latch
SKU: 02175-1
Locking gate latch. Latch releases so gate can swing both directions. One-handed operation. Prevents gate from sagging or swinging. Can be opened from horseback. Fits gates with 1 5/8" - 2" o.d. round tube.
Product Details »
Average Rating: 0/5 -
Gate Anchor
SKU: 02178-1
Holds any round tube gate open while you proceed through the gate opening with livestock, farming equipment or horses. You can position the gate at the desired degree of opening without movement. Helps prolong the life of your gate with anti-sagging.
Product Details »
Average Rating: 0/5 -
Gate Hinge Bolt for 1 3/4 Inch Gate
SKU: 02181-1
Bolt to be used with a 1.75 inch gate. Bolt goes through the post completely and bolts on the other side.
Product Details »
Average Rating: 0/5 -
Gate Hinge Bolt for 1 5/8 Inch Gate
SKU: 02179-1
Bolt to be used with 1 5/8 inch gate. Bolt goes through the post completely and bolts on the other side.
Product Details »
Average Rating: 0/5 -
Gate Hinge Bolt for 2 Inch Gate
SKU: 02180-1
Bolt to be used with a 2 inch gate. Bolt goes through the post completely and bolts on the other side.
Product Details »
Average Rating: 0/5 -
Gate Latch Bolt Kit
SKU: 4BK-1
Keep your horses where they belong, contained and safe. This gate latch bolt kit helps prevent horses from roaming free, by making sure your gate latches are correctly connected to your posts. The bolt kit contains 4 1.5 inch long lag bolts and 4 washers.
Product Details »
Average Rating: 0/5 -
Gates
SKU: GATE-1
Heavy duty farm-grade gates. Available painted or galvanized. Gates are available in 6, 10, 12 and 16 foot lengths. All gates are 4 inches shorter than listed to allow for gate hardware and proper clearance.
Product Details »
Average Rating: 0/5 -
Quick Latch
SKU: KLG-1
Our quick chain latch opens with ease with one hand on horseback or off. The quick latch is made of heavy-duty galvanized steel and welded chain. Gates and latches are an extremely important part of your horses' safety. Keep them out of harms way.
Product Details »
Average Rating: 0/5 -
Gate Wheel
SKU: GW-1
Fits all gates with round tubing from 1-5/8 inch - 2 inch diameter. Prevents gate end from sagging and gouging the ground. Will open and close with ease.
Product Details »
Average Rating: 0/5