Derby Stall Door Track Hardware
-
Derby Premium Track & Door Hardware Kit, Galvanized
This Derby door Premium track kit includes everything you need (including an 8' Premium track) to connect your sliding grill top door to your horse stall front. Easily slide your stall doors back-and-forth!
Compatibility: Derby Stalls
Product Details -
Derby Premium Track Door Hardware Kit, Galvanized
This Derby door hanging hardware kit includes everything you need (excluding the 8' Premium track) to connect your sliding door to your horse stall front. Easily slide your stall doors back-and-forth!
Compatibility: Derby Stalls
Product Details -
Slide Bolt Latch Kit, Zinc-Plated
This slide bolt latch kit can be used for either right-hand or left-hand installations and comes with everything you need to install it. This heavy-duty zinc-plated latch is built 1/2" thick!
Compatibility: Derby Stalls, Hinged Doors, or Sliding Doors
Product Details -
8' Premium Track
RAMM's 8' Premium track is a teardrop-shaped, heavy-duty self-cleaning track system. This unique profile can be squarely mounted, while the rounded bottom allows for self-cleaning and self-aligning.
Product Details -
Premium Track Front Mount Bracket, Galvalume
The Premium track front mount bracket is a key component to installing your RAMM 8' Premium track. Seven brackets are needed for a proper installation.
Compatibility: Cambridge and Derby Stalls or Barn Doors
Product Details -
#10 x 1-1/2" Phillips Pan Head Premium Track Bracket Screw, Zinc-Plated
Sold individually, these #10 - 1.5" long, zinc-plated Premium track bracket screws are used to install track brackets, which are used to hang the 8' Premium track to your horse stall.
Product Details -
90° Premium Track Trolley & Door Hanging Kit, 2-Pack, Galvanized
The 90° Premium track trolley kit includes a pair of trolleys and all of the installation hardware. They accommodate solid sliding doors that are 1½" to 2½" thick, weighing up to 600 lbs.
Compatibility: Derby Stalls and Barn Doors (1¾" to 2½" thick)
Product Details -
#14 x 1" Phillips Pan Head Tek Self-Drilling Clip Screw, Zinc-Plated
This #14 x 1" Phillips pan head tek self-drilling clip screw is zinc-plated for superior rust protection. Sold individually, these screws are used in different RAMM horse stall installations.
Product Details -
Premium Track End Cap
Premium track end caps help keep the sliding stall door's track as clean as possible. They prevent animals and debris from entering the track. Keep that sliding door's glide as smooth as the first day!
Track: 8' Premium Track
Product Details -
3/8" x 3-1/2" Hex Head Bolt, Zinc-Plated
This 3/8" x 3-1/2" hex head bolt will keep your Premium track trolleys from sliding off of the end of your 8' Premium track. This bolt acts as a door stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" Lock Nut
Product Details -
3/8" USS Flat Washer, Hot-Dip Galvanized
This 3/8" USS flat washer slides onto the 3/8" x 3-1/2" hex head bolt and is fastened with the 3/8" lock nut. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" x 3-1/2" Hex Head Bolt & 3/8" Locknut Product Details
-
3/8" Lock Nut, Zinc-Plated
This 3/8" lock nut secures the 3/8" USS flat washer and 3/8" x 3-1/2" hex head bolt to the 8' Premium track. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" x 3-1/2" Hex Head Bolt
Product Details -
Stay Roller
The stay roller is designed to guide a horse stall door smoothly along the track. It keeps doors up to 1½" thick aligned with the track and prevents them from being kicked out.
Door Compatibility: Accommodates doors up to 1½" thick.
Product Details -
1/4" x 1-1/2" Phillips Pan Head Stay Roller Screw, Zinc-Plated
Three 1/4" x 1-1/2" Phillips pan head stay roller screws are needed to install your stay roller. Sold individually, choose between zinc-plated or powder-coated black finishes.
Compatibility: Stay Roller
Product Details -
1/4" x 4" Hex Head Lag Screw, Zinc-Plated
After aligning your track's holes with the door posts, fasten two 1/4" x 4" hex head lag screws along with two 1/4" flat washers through the holes along the top edge of the track at the door post locations.
Track: 8' Premium Track
Product Details -
1/4" Flat Washer, Zinc-Plated
After aligning your track's holes with the door posts, fasten two 1/4" x 4" hex head lag screws along with two 1/4" flat washers through the holes along the top edge of the track at the door post locations.
Track: 8' Premium Track
Product Details
There are a lot of pieces that go into assembling a sliding door track system for each horse stall door. This page is dedicated to any replacement part you may want or need for the Derby horse stall series. We offer a Derby door premium track kit that includes everything you need including the 8' track itself or you can select replacement parts a la carté.
*For more photos and ideas, we welcome you to visit our Derby Horse Stalls Pinterest board section.