Fence Pro Black Paint
Fence Pro Black Paint is a durable, 100% acrylic water-based latex coating developed for wood posts, plank fencing, barns, and agricultural buildings. Its flexible semi-gloss finish resists chipping, peeling, weather damage, and mildew growth on the dried paint film while giving farm structures a clean, professional appearance.
- 100% acrylic, water-based latex formula
- Rich black semi-gloss finish
- Flexible coating resists chipping and peeling
- Provides dependable protection against outdoor weather
- Built-in mildewcide protects the dried paint film
- Suitable for new, weathered, and previously painted wood
- Applies by brush, roller, or airless sprayer
- Easy soap-and-water cleanup
- Safe for livestock environments when properly applied and fully dry
- Covers approximately 250 square feet per gallon on barn surfaces
- Provides approximately 3–6 years of fence protection with proper preparation
- Sold in convenient 5-gallon pails
- This product is non-returnable
Protect your investment and give your farm a bold, professional appearance with Fence Pro Black Paint. This 100% acrylic, water-based latex coating is specially formulated for plank fencing, wood posts, barns, and other agricultural structures.
Its durable semi-gloss finish creates an attractive surface that is easier to clean than a flat coating. The flexible acrylic formula helps resist chipping and peeling as the painted surface is exposed to changing weather conditions. A built-in mildewcide also helps restrict mildew growth on the dried paint film.
Fence Pro Black Paint can be applied to new, weathered, or previously painted wood as well as properly prepared concrete, masonry, brick, and primed metal. Application is easy using a brush, roller, or airless sprayer, and tools clean up conveniently with soap and water.
For maximum durability, surfaces should be clean, dry, and free of dirt, debris, mildew, and loose paint. Two coats may be required for the best appearance and long-term performance, especially on new or weathered wood.
Key Features:
- Durable Acrylic Formula: Provides dependable protection against chipping, peeling, and demanding outdoor conditions.
- Semi-Gloss Black Finish: Creates a bold, professional appearance and an easier-to-clean painted surface.
- Flexible Protection: The acrylic coating flexes with the surface to provide lasting performance on wood fencing and farm structures.
- Mildew-Resistant Coating: A built-in mildewcide helps restrict mildew growth after the paint has dried.
- Versatile Application: Suitable for wood, concrete, masonry, brick, and properly primed metal.
- Easy to Apply: Apply using a brush, roller, or airless sprayer.
- Simple Cleanup: The water-based formula allows tools and equipment to be cleaned with soap and water.
- Long-Term Performance: Provides approximately 3–6 years of protection on plank fencing, depending on preparation, application, condition, and exposure.
Recommended Uses:
- Plank fences and fence posts
- Barn interiors and exteriors
- Farm and agricultural buildings
- New and weathered wood
- Previously painted lumber
- Concrete, masonry, and brick
- Properly prepared and primed metal
Not recommended for floors or other high-abrasion surfaces.
Specifications:
- Color: Black
- Finish: Semi-gloss
- Formula: 100% acrylic, water-based latex
- Available Packaging: 5-gallon pails
- Flash Point: Greater than 201°F
- Viscosity: 90 KU
- Application Temperature: Above 50°F
- Application Methods: Brush, roller, or airless sprayer
- Shelf Life: Up to 2 years unopened
- Storage Temperature: 40°F to 90°F
- Cleanup: Soap and water
- Typical Fence Durability: Approximately 3–6 years
Estimated Coverage:
- Three- or Four-Board Fence: Approximately 16 linear feet per gallon, both sides
- One-Board Fence: Approximately 26 linear feet per gallon, both sides
- Barn Surfaces: Approximately 250 square feet per gallon
Actual coverage will vary based on surface porosity, texture, condition, application method, and material loss. Applying less than the recommended amount may reduce durability. Two coats may be required for optimal performance.
Drying Time:
At approximately 77°F and 50% relative humidity:
- Set to Touch: Approximately 1 hour
- Recoat: Approximately 4 hours
- Fully Dry: Approximately 24 hours
Drying time may vary based on temperature, humidity, rain, and dew. Do not apply if rain is expected within eight hours.
$59.38
In Stock
