Pro-Tek Electric Tape Starter Kit
The 1.5″ Pro-Tek Tape Starter Kit includes fencing and hardware needed for a 528’ 5-rail paddock.
$799.98
The 1.5″ Pro-Tek Tape Starter Kit includes all the fencing and hardware needed to build a 528′ five-rail paddock. Calculations are based on wood posts spaced 12′ apart, with one gate located in a corner. Designed for easy installation, this hand-tensioned system is a perfect weekend project to create a safe, reliable enclosure for your horses. Pro-Tek Tape backed by a 20-year limited manufacturer warranty.
Fence charger sold separately—choose the model that best fits your setup to complete your system.
Kit Includes:
2 – Pro-Tek 1.5″ Electric Tape Horse Fence, 1320′ Roll
5 – 1.5″ Electric Tape End Tensioners, 2-Pack
8 – 1.5″ Electric Tape Corner Tensioners, 2-Pack
9 – Universal Post 1.5″ Tape Insulators, 25-Pack
9 – #8 x 1-1/2″ Star Head Insulator Screws, 50-Pack, Stainless Steel
1 – Split Bolt Connectors, 10-Pack, Galvanized
1 – 1.5” Splice Connector, Each
1 – High-Voltage Burial Wire, 50′ Roll
1 – Ground Rods Kit
1 – 5-Light Fence Tester
Regular Price $835.02
Kit Price $799.98
You Save $35.04
- Roll Length: 1320′
- Rail Size: 1.5″
- Color: White, Black, or Brown
- Break Strength: Up to 750 lbs. per rail
- Material: 15 stainless steel wires woven with polyethylene fibers
- Fence Type: Electric
- Posts Compatibility: Wood, 48″ step-in plastic posts, T-posts, round rod, vinyl, PVC, and fiberglass
- Warranty: Pro-Tek 1.5″ electric tape includes a 20-year limited warranty against manufacturer defects and UV weathering. This warranty does not cover abuse or misuse. Proper installation per manufacturer guidelines is required. Warranty is voided if posts are spaced over 15′ apart or if rails are twisted.
- Note: 12′ post spacing (or less in high-traffic areas) is recommended to reduce risk of injury.
Below is a link to the Pro-Tek Electric Tape Installation Instructions in a PDF format, which you can save and print for future reference:
Pro-Tek Electric Tape Installation Instructionsopens in a new tab
Installation Tips
Following RAMM’s installation instructions will make this fencing solution an optimal choice for a “weekend warrior” project as it can be easily installed with just hand-tensioning. We suggest concreting in your corner and end posts for the stability and longevity of your horse fencing system. You can choose to install your electric horse fence system on many different post types: wood, t-posts, PVC, or fiberglass.
-
-
- End Tensioning: Tension and terminate your Pro-Tek electric tape runs with a Protek Tape End Tensioner
- Corner Tensioning: Use a Protek Tape Corner Tensioner when two rail ends of Pro-Tek electric tape meet in a corner
- Splicing: Running two ends of Pro-Tek electric tape through the tape splice buckle will connect the two rail ends together.
- Connection: To run the electric current to your Pro-Tek electric tape, use burial wire and a split bolt, or a contact clamp.
-
