Feed Door Insert
Feed door inserts add great functionality to any horse stall front. They eliminate having to enter the horse’s stall during feeding time throughout the day. Hardware is not included – feed door insert only.
Your Price: $135.30 – $140.89
[yith_wcwl_add_to_wishlist]
Feed door inserts add great functionality to any horse stall front. They eliminate having to enter the horse’s stall during feeding time throughout the day. They can save you or your farmhands a great deal of time, especially when you have multiple horses that may require different feed amounts and supplements. Our fully assembled feed door has a pull-down latch integrated into the bars. With a simple pull of the bar, the feed door opens and closes smoothly and quietly.
Finish: Hot-Dip Galvanized or Powder-Coated Black
Bar Gauge: 16-gauge
Bar Spacing: 3-1/4″
Bar Diameter: 7/8″
Bar Height (Inside-to-Inside): 33″
Opening Width: 22″
Compatibility:
*Note: Remove seven bars out of your Essex standard stall front grillwork to install the feed door.
Made in the USA!
Below are links to the installation instructions for both our compatible horse stalls in PDF format, which you can save and print for future reference:
Oxford Installation Instructions
Cambridge Installation Instructions
Installation: Insert the feed door tube caps into the ends of the feed door. Next, insert the top of the hinge bar completely up into the hole of the top grill channel, then set the bottom of the hinge bar into the hole of the bottom grill channel. Lastly, pull down the latch bar and swing it into place – latching it into the latch hole. For Essex installations, decide where the feed door is going to be located in the grillwork and omit 7 of the 3/4″ horse stall grill bars – leaving at least one bar from the end.
Essex Installation Instructions
