Flex Coat White Paint
RAMM’s white paint is a 100% acrylic, water-based latex formula designed especially for wood posts, plank fences, and barns. In addition, the durable coating provides reliable protection in demanding agricultural environments.
Furthermore, the flexible finish resists peeling and weather damage. As a result, your barn and fencing maintain a clean, professional appearance throughout the seasons.
Sold in convenient 5-gallon buckets, this exterior barn paint makes large projects more efficient and cost-effective.
Original price was: $99.38.$94.41Current price is: $94.41.
[yith_wcwl_add_to_wishlist]
Durable Protection for Barns and Fences
RAMM’s exterior fence and post paint delivers long-lasting protection for agricultural structures. Our Post and Fence Paint | Elastomeric Barn & Fence Coating is a water-based coating that comes in a convenient 5-gallon bucket and provides dependable coverage for barns, fencing, and farm buildings.
Unlike standard coatings, this post and fence paint features a flexible acrylic formula that reduces cracking and peeling. As a result, it performs well in demanding outdoor conditions.
The built-in mildewcide helps resist mildew growth on the dried paint film. Therefore, barns and fences maintain a cleaner, more professional look.
Versatile Application
You can apply this post and fence paint to exterior and select interior barn surfaces. It works well on silos, metal buildings, fencing, and other agricultural structures.
Key Features
-
Brighter white than conventional oil-based products.
-
Non-toxic – soap and water cleanup.
-
Effective mildewcide is incorporated to restrict mildew growth once paint is dry.
-
Exceptional flexibility resists chipping and peeling.
-
Offers exceptional economy and durability in a user-friendly water-based formulation.
-
Provides excellent weather protection.
- Safe around valuable horses and livestock.
- Can be applied directly to new, weathered or previously painted lumber.
- Will not stop tannin stain. To ensure tannin stain is blocked an oil-based primer (Fence & Barn White) is commonly used as a primer coat.
- 3 to 6 years of durability on plank fence, depending on condition and surface preparation. Initial coat on new wood will age quicker than recoats.
RECOMMENDED USES
- Plank fences
- Barns exteriors and interiors
- Farm buildings
- Silos
- New and weathered wood
- Concrete, masonry, and brick
- Metal structures – will not prevent rust
- Properly primed steel
- Not suitable for flooring or high abrasion surfaces
Not designed to inhibit rust. If applied over a previously rusted surface or to inhibit future rust, a coat of oil-based primer (Shopcoat Primer 299) is recommended.
CHARACTERISTICS
Color: White, Custom Colors
Finish: Flat
Flash point: > 201°F (PMCC)
Viscosity: 90 KU
Available Packaging: 5-gal pails, 55-gal drums VOC Less than 250 grams/liter
To increase flexibility and durability, product will dry softer than conventional paints and may retain a slight tack.
SHELF LIFE
2 years unopened, stored out of direct sunlight at temperatures between 40°F and 90°F. Settling can occur, product must be shaken vigorously before use.
For best results, flip pails upside down while shaking.
DO NOT FREEZE
COVERAGE
3 & 4 board fence: 16 ft. / gal., both sides.
1 board fence: 26 ft. / gal., both sides.
Barns: 250 sq. ft. / gal.
Typical fence posts are placed 8 feet apart.
Coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Using less than recommended material will lead to decreased durability. May require two coats for best results – especially on new wood.
On new wood always check for tannin stain by applying to a test area. If it occurs use an oil-based primer such as Fence & Barn White. Allow 24 hours before top-coating with this product.
DRYING TIME @ 77°F / RH 50%
Set to touch 1 hour
Re-coat 4 hours
Fully dry 24 hours
Drying times vary based on rain, dew, and temperature. Do not paint if rain is expected within 8 hrs.
RECOMMENDED FILM THICKNESS
Wet film – per coat 6.0 to 10.0 mils
Dry film – per coat 2.0 to 4.0 mils
APPLICATION
Product should be thoroughly mixed before use. No thinning needed – if necessary, thin with 4 fl. oz. water per gal. paint.
Application temp. above 50°F
Method Brush, roll, or spray
Allow new wood 1 to 3 months to weather to reduce moisture content. Moisture content of wood should be no more than 15%.
Do not paint the underside of fence planks.
Airless spray:
Rating: 0.5 gal / minute minimum
Pressure: 1800-2500psi
Filter: 30 to 60 mesh
Tip Size: 0.017″ to 0.025″
SURFACE PREPARATION
For greatest durability make sure surface is scraped or pressure washed thoroughly to remove any peeling or flaking paint before applying.
In areas where mildew is a problem, always scrub the surface with a commercial mildew remover or bleach solution.
