Derby Feed Opening Kit
The Derby stall feed opening kit allows feeding from outside the stall. It is convenient when having others help with chores. It features a galvalume finish for long-lasting use.
Compatibility: Derby Stalls
Your Price: $28.44
In Stock
[yith_wcwl_add_to_wishlist]
The Derby stall feed opening kit allows feeding from outside the stall. It is convenient when having others help with chores. It features a galvalume finish for long-lasting use.
Finish: Galvalume
Height: 12″
Opening Height: Varies (We recommend 9″)
Width: 12″
Opening Width: 11″
Depth: 1.5″
Compatibility: Derby Stalls
Kit Includes:
- 1 – Derby Feed Opening
- 4 – 8-18 x 3/4″ Hex Head Self-Driller for Feed Opening
- 2 – 1-3/8″ Derby Feed Opening Plugs
- 2 – Horse Stall Grommets
Not Included: Horse Stall Grill Bars
Below is a link to the installation instructions for our Derby horse stalls in a PDF format, which you can save and print for future reference:
Derby Stall Installation Instructions
Installation: Decide where the feed opening is going to be located. Cut two stall grill bars to the desired length (bars cut to 22” will give you approximately a 12” opening). Slide the feed opening plate over the two outer bars of the opening. Let the feed opening plate rest on the bottom grill channel. Insert the two cut stall grill bars in the top grill channel and slide the feed opening plate up – until it is tight with the two cut bars. Use the four supplied hex head self-drillers to hold the feed opening plate in place through holes in the feed opening plate.
