Farm Pro Red Latex Barn Paint
Acrylic Latex Water-Based Fence & Barn Paint
RAMM’s Farm Pro Red barnpaint is made out of 100% acrylic paint. It’s great for barns, fences, new or weathered wood, concrete, and metal. It’s highly visible and cleanup is a breeze; just use soap and water.
Your Price: $64.50
In Stock
[yith_wcwl_add_to_wishlist]
Are you in search of a robust and high-quality, lead-free paint to preserve the aesthetic appeal of your barn? RAMM’s Farm Pro Red barn paint serves as an ideal solution for your agricultural needs. This top-tier paint is formulated to provide enduring results, ensuring that your property remains visually appealing for many years.
FEATURES
- Non-toxic – soap and water cleanup.
- Flexibility resists chipping and peeling.
- Offers exceptional economy and durability in a user-friendly water-based formulation.
- Provides excellent weather protection and decoration.
- Safe around valuable horses and livestock.
- Can be applied directly to new, weathered or previously painted lumber.
- 3 to 6 years of durability on plank fence, depending on condition and surface preparation.
RECOMMENDED USES
- Barn exteriors and interiors
- Plank fences
- Silos
- Farm buildings
- New and weathered wood
- Concrete, masonry, and brick
- Metal structures – will not prevent rust
- Properly primed steel
- Not suitable for flooring or high abrasion surfaces
CHARACTERISTICS
Color: Red
Finish: Semi-Gloss
Flash point: > 201°F (PMCC)
Viscosity: 90 KU
Available Packaging 5-gal pails, 55-gal drums VOC Less than 250 grams/liter
To increase flexibility and durability, product will dry softer than conventional paints and may retain a slight tack.
SHELF LIFE
2-years unopened, stored out of direct sunlight at temperatures between 40°F and 90°F.
Settling can occur, product must be shaken vigorously before use. For best results, flip pails upside down while shaking.
DO NOT FREEZE
COVERAGE
3 & 4 board fence 16 ft. / gal., both sides
1 board fence 26 ft. / gal., both sides
Barns 250 sq. ft. / gal. Typical fence posts are placed 8 feet apart.
Coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Using less than recommended material will lead to decreased durability. May require two coats for best results – especially on new wood.
DRYING TIME @ 77°F / RH 50%
Set to touch: 1 hour
Re-coat: 4 hours
Fully dry: 24 hours
Drying times vary based on rain, dew, and temperature. Do not paint if rain is expected within 8 hrs.
RECOMMENDED FILM THICKNESS
Wet film – per coat 6.0 to 10.0 mils
Dry film – per coat 2.0 to 4.0 mils
APPLICATION
Product should be thoroughly mixed before use. No thinning needed – if necessary, thin with 4 fl. oz. water per gal. paint.
Application Temp: above 50°F
Method: Brush, roll, or spray
Allow new wood 1 to 3 months to weather to reduce moisture content (less than 15% recommended).
Do not paint the underside of fence planks.
Airless spray:
Rating: 0.5 gal / minute minimum
Pressure: 1800-2500psi
Filter: 30 to 60 mesh
Tip Size: 0.017″ to 0.025″
SURFACE PREPARATION
For greatest durability make sure surface is scraped or pressure washed thoroughly by removing any peeling or flaking paint before applying.
Coverage
3 & 4 board fence: 16 ft. / gal., both sides
1 board fence: 26 ft. / gal., both sides
Barns: 300 sq. ft. / gal.
Typical fence posts are placed 8 feet apart.
Coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. Using less material than recommended will see a decrease in durability. May require two coats for best results – especially on new wood.
Drying Time @ 77°F / RH 50%
Set to touch: 1 hour
Re-coat: 4 hours
Fully dry: 24 hours
Drying times are affected by rain, dew, and temperature. Do not paint if rain is expected within 8 hours.
Recommended Film Thickness
Wet film – per coat: 6.0 to 10.0 mils
Dry film – per coat: 2.0 to 4.0 mils
Application
Product should be thoroughly mixed before use. No thinning needed – if necessary, thin with 4 fl. oz. water per gal. paint.
Application temperature: above 50°F
Method: Brush, roll, or spray
Allow new wood 1 to 3 months to weather to reduce moisture content. Do not paint the underside of fence planks.
Airless spray:
- Rating: 0.5 gallons / minute minimum
- Pressure: 1,800-2,500 psi
- Filter: 30 to 60 mesh
- Tip Size: 0.017″ to 0.025″
Roller application: use thick nap 7” roller.
Surface Preparation
For greatest durability make sure surface is scraped or pressure washed thoroughly by removing any peeling or flaking paint before applying.
