2″ Barbed Staples, 1-Pound (50)
These 2″ extra-wide, galvanized double-barbed staples accommodate Shockline Flex Fence electric coated wire insulator tubing – used for corner posts. Sold in increments of 1 lb.
Posts Compatibility: Wood
Tool: Wide Barbed Staple Starter
$3.99
Out of Stock
Email when stock available
[yith_wcwl_add_to_wishlist]
These Class 3 galvanized 2 inch barbed staples securely hold coated wire fencing in place on your line and corner posts. At the same time, they still let it slide through like a belt loop.
Use to terminate your coated wire at your end posts. The two barbs on each side of the 2 inch barbed staple. Not what you will find at your local hardware store! Instead, they grasp right into the post and secure your rails.
<h4>Specifications:
- Quantity: Sold by the Pound / Approximately 50 per Pound
- Length: 2″
- OD Width: 5/8″
- ID Width: 3/8″
- Material: Class 3 Galvanized Steel
- Metal Gauge: 8-Gauge
- Tool Compatibility: Barbed Staple Starter
class=”yoast-text-mark”>class=”ai-optimize-24 ai-optimize-introduction”>Installation: Installs quickly and effortlessly with a barbed staple starter (sold separately). *Note: Leave about a 1/4″ gap between the staple and fence rail for rail movement.
