Choose from an assortment of our replacement Premium track hardware supplies. RAMM’s Premium track is a quality teardrop-shaped, heavy-duty self-cleaning track system.
Showing all 21 results
Securely anchor your stall channeling and hardware with these heavy-duty #12 x 1-1/4″ Stall Screws. Designed specifically for equestrian builds, these screws feature an easy-to-use Phillips drive pan head and a durable zinc-plated finish for reliable rust protection. Sold in a convenient 50-pack so you have exactly what you need to finish the job.
Ensure smooth, reliable movement for your barn doors with the 90° Premium Track Trolley Kit. Designed for heavy-duty use, this complete set includes a pair of trolleys and all the necessary installation hardware. It easily accommodates door thicknesses from 1-3/8″ to 2-3/8″ and boasts a massive weight rating of up to 600 lbs. Perfectly compatible with the Derby horse stall system or traditional sliding barn doors.
Compatibility: Derby Stalls and Barn Doors
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
The adjustable stay roller kit is used to guide horse stall and barn doors (1″ to 3¾” thick) smoothly along the track. The guide wheel will keep your door on track, preventing it from swinging outward.
Door Compatibility: Accommodates doors 1″ to 3¾” thick.
The adjustable stay roller is made from galvanized steel and comes with a 2″ non-marking plastic guide wheel. The guide wheel will keep your door from swinging outward, keeping it in line.
Door Compatibility: Accommodates doors 1″ to 3¾” thick.
The Premium track top mount bracket is a key component to installing your RAMM 8′ Premium track. Seven brackets are needed for a proper installation.
The Premium track trolley is used for hand-sliding stall doors in the 8′ Premium track. There is no metal-to-metal contact, meaning this system functions very quietly. Sold individually, two trolleys and bolts are needed per door.
Compatibility: Premium Track Offset Trolley Bolt
Premium offset trolley bolts connect Premium track trolleys to the sliding stall door track system. The trolley goes through the top of the door and suspends it, allowing it to slide smoothly.
Compatibility: Premium Track Trolley
Protect your sliding stall door hardware with these Premium Track End Caps. Designed to seal off the open ends of your overhead track, they prevent accumulating dust, hay, and barn debris from jamming your door trolleys. They also keep small pests like birds and mice from nesting inside the track. Available in your choice of Galvalume (metallic) or Powder-Coated Black.
Please note: Sold individually. Two (2) end caps are required to complete a new track installation.
Track: 8′ Premium Track
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
The post bumper is made of heavy-duty solid steel and is compatible with doors that are up to 1½” thick. It keeps the door tight to the stall front and won’t allow it to swing outward while closed. Available in a hot-dipped galvanized or powder-coat paint finish.
Door Compatibility: Accommodates doors up to 1½” thick.
Ensure smooth and safe operation of your sliding barn doors with this heavy-duty Stall Door Stay Roller. Designed to keep sliding doors up to 1½” thick perfectly aligned with their track, it prevents doors from being pushed or kicked out by your horses. Featuring a non-marking plastic guide wheel, it is compatible with Cambridge, Derby, Essex, and Oxford stall systems. Available in your choice of Galvalume or Powder-Coated Black finishes.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Securely install your sliding door guides with the 1/4″ x 1-1/2″ Phillips Pan Head Stay Roller Screw. Purpose-built for barn environments, these heavy-duty fasteners are available in your choice of a rust-resistant zinc-plated or sleek powder-coated black finish to match your aesthetic.
Please note: This item is sold individually. Three (3) screws are required to complete a standard stay roller installation.
Compatibility: Stay Roller
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Speed up your stall installation with the #14 x 1″ Phillips Pan Head Tek Self-Drilling Clip Screw. Featuring a built-in drill point for effortless installation and a heavy-duty zinc-plated finish for superior rust protection, this premium fastener is built for tough barn environments. It is an essential hardware component used across several RAMM horse stall series installations.
Please note: This item is sold individually as a replacement part or add-on.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Securely mount your horse stall sliding doors with our Premium Track Bracket Screws. Specifically designed to install premium track brackets for hanging the 8′ Premium track, these #10 x 1.5″ fasteners feature a Phillips pan head and a heavy-duty zinc-plated finish for exceptional rust protection.
Please note: Sold individually. These screws are exclusively compatible with our Premium track brackets.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
The Premium track flush top mount bracket is a key component to installing your RAMM 8′ Premium track. Seven brackets are needed for a proper installation.
Compatibility: Dublin Stalls
The Premium Track Front Mount Bracket securely supports RAMM’s 8′ Premium Track, providing a strong, stable mounting point for smooth, dependable sliding door operation. Manufactured from heavy-duty galvanized steel for superior strength and corrosion resistance, this bracket is designed to withstand the demands of daily use in horse barns and agricultural facilities. Compatible with RAMM Derby and Cambridge horse stall systems, it can also be used with a variety of sliding barn door applications.
Please Note: Brackets are sold individually. Seven (7) front mount brackets are required to properly support one 8′ Premium Track. Mounting screws are sold separately.
Trolly bolt is used with the trolly and track to adjust and make sliding door plum, as well as adjust the space between the door post and door.
Compatibility: Premium Track Trolley
The Premium track latch catch bracket works with the spring bar latch for the Premium track system. Compatible with the Cambridge, Dublin and Nobleman horse stalls.
This Premium track splice clip connects two 8′ Premium tracks together to form one, 16′ Premium track system. This is a great piece for assembling long sliding barn doors and is made to last!
Track: 8′ Premium Track
1/4″ x 4″ hex head lag screws are used to securely install an 8′ Premium Track System. Zinc-plated for a long-lasting track system.
Track: 8′ Premium Track
The 5/16″ x 1-1/2″ hex head lag screw is used to secure stall components such as the post bumper, door latch handle, and more. Two lag screws are required for both installations. Sold individually.
1/4″ Flat Washers are used with the hex head lag screws to install an 8′ premium track system. They feature a rust-resistant zinc-plating for a long-lasting track system.
Track: 8′ Premium Track
Loading...
Your cart is currently empty!
Notifications
