Premium Track 1/2″ x 6-1/2″ Offset Trolley Bolt & Nuts

0.5″ x 6.5″ offset trolley bolt is used with the trolly and track to adjust and make sliding door plum, as well as adjust the space between the door post and door.  It is required for a track and trolly system. Compatible with the Cambridge, Dublin, and Nobleman horse stall systems.*Only available in a zinc-plated (metallic) finish.

Includes:

• 1 – Offset Trolley Bolt
• 1 – Flange
• 1 – Jam Nut

Installation:

• Insert the offset trolley bolt through the hole in the Premium track trolley wheel assembly {sold separately}.
• Thread the trolley bolt nut onto the offset trolley bolt.
• Feed the offset trolley bolt through the holes from the top of the door header.
• Thread trolley bolt flanged nut on the end of trolley bolt and hand-tighten.  *Do not fully tighten until the stall front is complete.
• Final adjustments in the door alignment can be made after the door is hung on a track.
• The trolley bolt can be rotated to adjust the space between the doorpost and the door.