#8-18 x 3/4″ Hex Head Screw for Feed Opening
Keep your stall installation moving smoothly with the exact #8-18 x 3/4″ Hex Head Self-Drilling Screw required for your barn. Whether you need a replacement or just want a few extras on hand, this specific piece of hardware is exactly what is used for the Derby and Essex Feed Opening Kits.
-
Exact Replacement: The identical hardware included with our Derby and Essex Feed Opening Kits.
-
Self-Drilling Design: Engineered to drill its own hole as it is driven, saving you valuable installation time.
-
Hex Head Drive: Allows for excellent grip and high-torque driving with a standard hex bit or socket.
Please Note: This product is sold individually. Please adjust your cart quantity to reflect the exact number of screws you need.
Don’t let a missing or stripped piece of hardware slow down your barn project. The #8-18 x 3/4″ Hex Head Self-Drilling Screw is the exact replacement fastener used for installing both the Derby and Essex Feed Opening Kits.
While feed openings are a fantastic way to add style and daily functionality to your horse stall fronts, realizing you are a few screws short halfway through the installation can be incredibly frustrating. These specific screws are already included when you purchase our complete feed opening kits, but we offer them here individually so you can easily grab extras for repairs, replacements, or custom stall setups.
Featuring a self-drilling point, this screw is designed to penetrate metal effortlessly without the need for a pre-drilled pilot hole, drastically speeding up your assembly time. The hex head design ensures a solid grip for your drill or socket, allowing you to apply the necessary torque without stripping the head.
Key Features & Benefits:
-
Perfect Fit: The exact factory replacement hardware for Derby and Essex Feed Opening Kits.
-
Time-Saving Installation: Self-drilling point eliminates the need to pre-drill pilot holes in most applications.
-
No Stripped Heads: The hex head design provides a solid, slip-free grip for your driver bit.
-
Handy for Repairs: The perfect item to add to your order just to keep a few spare screws in the tack room.
-
Custom Quantities: Sold per screw so you never have to overpay for a massive box when you only need three.
Below are links to the installation instructions for both our Essex horse stalls & Derby horse stalls in PDF format, which you can save and print for future reference:
Essex Standard Stall Premium Track Installation Instructions
Derby Pro-Line Stall Installation Instructions
Installation: Decide where the feed opening is going to be located. Cut two stall grill bars to the desired length (bars cut to 22” will give you approximately a 12” opening). Slide the feed opening plate over the two outer bars of the opening. Let the feed opening plate rest on the bottom grill channel. Insert the two cut stall grill bars in the top grill channel and slide the feed opening plate up – until it is tight with the two cut bars. Four – #8-18 x 3/4″ hex head self-driller screws are required to hold the feed opening plate in place through holes in the feed opening plate.
Shipping: This item ships via USPS or a ground delivery service.
$0.05
In Stock
