#8-18 x 3/4″ Hex Head Screw for Feed Opening
This replacement #8-18 x 3/4″ hex head self-driller screw is used when installing a feed opening kit in a Derby or Essex Feed Opening Kit. Sold individually.
Your Price: $0.23
In Stock
[yith_wcwl_add_to_wishlist]
This replacement #8-18 x 3/4″ hex head self-driller screw is used when installing a feed opening kit in a Derby or Essex Feed Opening Kit. Feed openings add both functionality and style to your horse stall fronts. They are included with feed opening kits for both stall series, however, we they are available for purchase individually as well. Sold individually.
Below are links to the installation instructions for both our Essex horse stalls & Derby horse stalls in PDF format, which you can save and print for future reference:
Essex Standard Stall Premium Track Installation Instructions
Derby Pro-Line Stall Installation Instructions
Installation: Decide where the feed opening is going to be located. Cut two stall grill bars to the desired length (bars cut to 22” will give you approximately a 12” opening). Slide the feed opening plate over the two outer bars of the opening. Let the feed opening plate rest on the bottom grill channel. Insert the two cut stall grill bars in the top grill channel and slide the feed opening plate up – until it is tight with the two cut bars. Four – #8-18 x 3/4″ hex head self-driller screws are required to hold the feed opening plate in place through holes in the feed opening plate.
