There are a lot of pieces that go into assembling a sliding door track system for each horse stall door. This page is dedicated to any replacement part you may want or need for the Essex horse stall series. We offer a Premium track stall door kit that includes everything you need for an Essex sliding stall door (including the 8′ track itself) or you can select replacement parts a la carté. *For more photos and ideas, we welcome you to visit our Essex Horse Stalls Pinterest board section.
Showing all 25 results
This self-cleaning 8′ Premium track door kit allows for smooth operation and can withstand the weight of doors up to 600 lbs. The rounded bottom opening allows for debris to fall out.
The Premium track door hardware kit has all components needed to hang an Essex or Oxford horse stall door, excluding the 8′ Premium track and lifting rod.
RAMM’s door top latch system hardware kit is a self-latching system designed to make sure your sliding stall door stays secure and closed.
RAMM’s door top latch system hardware kit is a self-latching system designed to keep sliding stall doors secure and closed. Constructed of high-quality, heavy-duty galvanized steel, the rugged design will…
The Premium track top mount bracket is a key component to installing your RAMM 8′ Premium track. Seven brackets are needed for a proper installation.
The Premium track trolley is used for hand-sliding stall doors in the 8′ Premium track. There is no metal-to-metal contact, meaning this system functions very quietly. Sold individually, two trolleys and bolts are needed per door.
Compatibility: Premium Track Offset Trolley Bolt
Premium offset trolley bolts connect Premium track trolleys to the sliding stall door track system. The trolley goes through the top of the door and suspends it, allowing it to slide smoothly.
Compatibility: Premium Track Trolley
Protect your sliding stall door hardware with these Premium Track End Caps. Designed to seal off the open ends of your overhead track, they prevent accumulating dust, hay, and barn debris from jamming your door trolleys. They also keep small pests like birds and mice from nesting inside the track. Available in your choice of Galvalume (metallic) or Powder-Coated Black.
Please note: Sold individually. Two (2) end caps are required to complete a new track installation.
Track: 8′ Premium Track
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
The lifting rod connects the handle on the door to the top latch assembly on the top of the door. By lifting up the “lifting rod” you release the latch on the top of the door, for a simple one-handed operation and a well-secured door.
Sliding door pin lock kit is designed to prevent horses from pushing the door outward. It locks the stall door into a closed position. Operation is as simple as inserting the pin into the wall receiver.
This pin lock wall receiver is zinc-plated for rust protection. It’s used in the sliding door pin lock kit, which prevents horses from pushing the door outward and locking the stall door into a closed position.
This pin lock pin & chain is zinc-plated for rust protection. It’s used in the sliding door pin lock kit, which prevents horses from pushing doors outward and locked into a closed position.
This pin lock holster is zinc-plated for rust protection and holds the pin in place when the door is being used.
This pin lock chain guide features a stainless steel finish for rust protection and is used to hold the pin in place. It is included in the sliding door pin lock kit.
The post bumper is made of heavy-duty solid steel and is compatible with doors that are up to 1½” thick. It keeps the door tight to the stall front and won’t allow it to swing outward while closed. Available in a hot-dipped galvanized or powder-coat paint finish.
Door Compatibility: Accommodates doors up to 1½” thick.
Ensure smooth and safe operation of your sliding barn doors with this heavy-duty Stall Door Stay Roller. Designed to keep sliding doors up to 1½” thick perfectly aligned with their track, it prevents doors from being pushed or kicked out by your horses. Featuring a non-marking plastic guide wheel, it is compatible with Cambridge, Derby, Essex, and Oxford stall systems. Available in your choice of Galvalume or Powder-Coated Black finishes.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Securely install your sliding door guides with the 1/4″ x 1-1/2″ Phillips Pan Head Stay Roller Screw. Purpose-built for barn environments, these heavy-duty fasteners are available in your choice of a rust-resistant zinc-plated or sleek powder-coated black finish to match your aesthetic.
Please note: This item is sold individually. Three (3) screws are required to complete a standard stay roller installation.
Compatibility: Stay Roller
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
This #8 x 1″ Phillips pan head Tek self-drilling clip screw has a zinc-plated finish for rust protection. Sold individually, this screw is used in several RAMM horse stall series installations.
This #12 x 1-1/4″ Phillips flat head pin lock screw is used to attach the pin lock wall receiver to the horse stall door. Zinc-plated for rust protection. Sold individually.
Speed up your stall installation with the #14 x 1″ Phillips Pan Head Tek Self-Drilling Clip Screw. Featuring a built-in drill point for effortless installation and a heavy-duty zinc-plated finish for superior rust protection, this premium fastener is built for tough barn environments. It is an essential hardware component used across several RAMM horse stall series installations.
Please note: This item is sold individually as a replacement part or add-on.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Securely mount your horse stall sliding doors with our Premium Track Bracket Screws. Specifically designed to install premium track brackets for hanging the 8′ Premium track, these #10 x 1.5″ fasteners feature a Phillips pan head and a heavy-duty zinc-plated finish for exceptional rust protection.
Please note: Sold individually. These screws are exclusively compatible with our Premium track brackets.
Proudly Made in the USA. No imported horse stalls—just American craftsmanship you can trust.
Trolly bolt is used with the trolly and track to adjust and make sliding door plum, as well as adjust the space between the door post and door.
Compatibility: Premium Track Trolley
1/4″ x 4″ hex head lag screws are used to securely install an 8′ Premium Track System. Zinc-plated for a long-lasting track system.
Track: 8′ Premium Track
The 5/16″ x 1-1/2″ hex head lag screw is used to secure stall components such as the post bumper, door latch handle, and more. Two lag screws are required for both installations. Sold individually.
1/4″ Flat Washers are used with the hex head lag screws to install an 8′ premium track system. They feature a rust-resistant zinc-plating for a long-lasting track system.
Track: 8′ Premium Track
Loading...
Your cart is currently empty!
Notifications
