If you’re running electric fencing to contain your horses or livestock, then you’re going to need insulators to keep the electric current running down the fence rail. Our insulators feature simplified installation methods and have been field-tested. If you have horses that are coming in contact with your fence or like the other side (where the grass is always greener), extended insulators may be best. Fence Insulators Guide If you’re unsure what insulators are compatible with your fence and/or posts we have friendly account managers who can walk you through everything. Call 800-434-8456 to get started today!
Showing all 22 results
The coated wire end loop assembly allows you to quickly start and stop your Raceline and Shockline coated wire fencing. The insulated loop easily connects power from your fence charger to your Shockline fence. Use with an In-Line Tensioner to eliminate the need for time-consuming crimp sleeves.
The extended t-post insulators help extend electric tape fencing 3.5″ away from t-posts to help protect the fence line. They feature a snap on/off fastening system.
Compatibility: Pro-Tek Tape Posts Compatibility: T-Posts
These insulators extend 1.5″ electric tape fencing 3.5″ away from wood fence posts. This will help keep your horses away and protect your fencing system.
Compatibility: Pro-Tek Tape Posts Compatibility: Wood
The 6″ extended t-post pin-lock insulators keep electric away from the fence line and keeps horses from getting close to the t-posts. Slide them onto your t-posts and lock in your fence rail with the provided pins.
Compatibility: Coated Wire, Braid, & Rope
Post Compatibility: T-Posts
This 6″ extended ring insulator is made of a continuous steel reinforced ring with a heavy screw at the end. Extend your fence rail 6″ from wooden fence posts, while firmly fastening without losing energy.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Wood
Durable ring insulators with clamp that tightly hold electric fencing away from the fence by clamping onto either pipe or round rod posts. Helps protect fence lines and gates from animal abuse. Sold individually.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Pipe or Round Rod
The ring insulator drill adapter hooks into any handheld drill, for a super quick installation. It’s compatible to install both the ring insulators and the extended 6″ ring insulators into wooden fence posts.
These round rod 1.5″ tape insulators accommodate electric tape up to 1.5″ wide. They slide right over the round rods and screw in place for a tight, secure hold. They are impact-resistant and are made in the USA.
Compatibility: Pro-Tek Tape Posts Compatibility: Fiberglass or Steel Round Rods
The t-post 1.5″ tape insulators clip onto steel t-posts to hold electric horse fencing. They accommodate for standard-sized t-posts (1.25 or 1.33/ft.) and feature a snap on/off fastening system.
Compatibility: Pro-Tek Tape Posts Compatibility: T-Posts
The t-post claw insulators fit securely on standard (1.25″ or 1.33″) studded t-posts. Created as one molded piece, these insulators require no tools or hardware; allowing for an easy installation.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: T-Posts
These t-post pin-lock insulators slide onto your t-posts and lock in your fence rail with the provided pins. Available in black and white. Sold in packs of 25.
Compatibility: Coated Wire, Braid, & Rope Posts Compatibility: T-Posts
Built with high-density polyethylene and UV stabilizers, these t-post universal toppers were made to handle the roughest weather conditions and grip tight to the t-posts.
Compatibility: Coated Wire, Tape, Braid, & Rope
Posts Compatibility: T-Posts
Made from polyethylene, these universal post 1.5″ tape insulators are impact-resistant and protected against UV deterioration. When attached, the locking face holds the electric tape tight reducing wind vibration.
Compatibility: Pro-Tek Tape
Posts Compatibility: Vinyl & Wood
Fasten your electric fence without losing energy through the post with these heavy-duty, universal post claw insulators. The fence can be installed by turning it about 80° and sliding it into the insulator’s slot.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Vinyl & Wood
These universal post pin-lock insulators tightly fasten electrified fencing to posts without losing energy. A molded pin holds the fence tightly, then to release the wire, simply pull the pin.
Compatibility: Braid & Rope
Posts Compatibility: T-Posts, Vinyl, & Wood
Coated wire 5″ insulator tubes can be used as line post insulators for your electric fencing. Provides extra protection against shorting out fence systems and helps prevent loss of current.
Compatibility: Shockline
Posts Compatibility: Wood
Insulator tubing is ideal for creating wrap-around insulators for corner and end posts. Can be cut to size to accommodate the diameter of your post. Cuts very easily with a utility knife or side cuts.
Compatibility: Shockline
Posts Compatibility: Wood
These unique roller insulators allow your electric fence rails to roll through the insulators on the outside and inside corners of your horse fence system. They’re specifically used for corner and end posts.
Compatibility: Braid & Rope
Posts Compatibility: Wood
These wood post flexible pin-lock insulators lock your fence rail in place with the provided pins for your wood posts. They’re available in black or white.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Wood
Made of heavy-duty material for a long-lasting professional installed look. For up to 90º on an inside corner. Screws directly into wooden corner posts while holding the wire away from the post.
Compatibility: Coated Wire, Braid & Rope
Posts Compatibility: Wood
These wood pin-lock insulators tightly fasten electrified fencing to your wood fence posts without losing energy. A molded pin holds the wire tightly and when you are ready to release the wire, simply pull the pin.
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Wood
This durable ring insulator quickly screws into wood posts and will hold your electric fencing tightly. It will hold the fencing 2″ away from the fence posts and are very easy to install (even easier with our ring insulator adaptor).
Compatibility: Coated Wire, Braid, & Rope
Posts Compatibility: Wood
Loading...
Your cart is currently empty!